If your air conditioner is installed correctly, or if major installation problems are found and fixed, it will perform efficiently for years with only minor routine maintenance. However, many air conditioners are not installed correctly. As an unfortunate result, modern energy-efficient air conditioners can perform almost as poorly as older inefficient models. Do you know what you should be looking for when thinking about the installation and location of air conditioner systems?

When installing a new central air conditioning system, be sure that your contractor:

  • Allows adequate indoor space for the installation, maintenance, and repair of the new system, and installs an access door in the furnace or duct to provide a way to clean the evaporator coil
  • Uses a duct-sizing methodology such as the Air Conditioning Contractors of America (ACCA) Manual D
  • Ensures there are enough supply registers to deliver cool air and enough return air registers to carry warm house air back to the air conditioner
  • Installs duct work within the conditioned space, not in the attic, wherever possible
  • Seals all ducts with duct mastic and heavily insulates attic ducts
  • Locates the condensing unit where its noise will not keep you or your neighbors awake at night, if possible
  • Locates the condensing unit where no nearby objects will block airflow to it
  • Verifies that the newly installed air conditioner has the exact refrigerant charge and airflow rate specified by the manufacturer
  • Locates the thermostat away from heat sources, such as windows or supply registers.

If you are replacing an older or failed split system, be sure that the evaporator coil is replaced with a new one that exactly matches the condenser coil in the new condensing unit. (The air conditioner’s efficiency will likely not improve if the existing evaporator coil is left in place; in fact, the old coil could cause the new compressor to fail prematurely.)